Deye 12Kw Three Phase Hybrid Inverter

SUN 5/6/8/10/12K-SG is brand new three phase hybrid inverter with low battery voltage 48V, ensuring system safe and reliable. With compact design and high-power density, this series supports 1.3 DC/AC ratio, saving device investment. It supports three phase unbalanced output, extending the application scenarios. Equipped with CAN port (x2) BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remotely control, x1 DRM port, which makes the system smart and flexible.

Smart Monitoring Platform

Thanks to the smart monitoring platform, Deye full series inverter products support remotely shutdown immediately when accident occurs.Setting parameters and FW update remotely, which makes PV plant O&M easier.

Key Features

• 48V low voltage battery, transformer isolation design
• 6 time periods for battery charging/discharging
• Max. charging/discharging current of 240A
• Max.10pcs parallel
• DC couple and AC couple to retrofit existing solar system
• Support storing energy from diesel generator
• Supports three phase unbalanced output
• Unique Smart Load application and Grid peak shaving function

Specification

• Package Includes WIFI Dongle & Current Transformer
• Max Efficiency of 97.6%
• 2 MPPT (Maximum Power Point Tracker)
• RS485 / CAN Communication Ports
• Load or Home power first with Zero Export to the Grid
• IP65 Ingress Protection
• High Power Factor
• 2 kinds of AC couple method to update existing solar system to energy storage system
• Supports Generator Connection
• Six stages time of use setting
• Support multiple parallels
• Touchscreen Interface
• Update existing solar on-grid system to a hybrid system
• Use Gen input as crucial load output
• Compatible with PYLONTECH, LG, BYD etc, brand battery
• Output: 230V/400V AC Three Phase @ 50Hz/60Hz
• PV Rapid Shutdown Control, PV Arc Fault detection, input lightning protection, multiple inverters in parallel
• Multiple working modes: Grid-Tied, Hybrid or Off-Grid
• Simultaneously manages power to / from Panels, Batteries, Grid, Load, and Generator
• UPS time: less than 5ms
• Charge and Discharge up to 240A, 12Kw
• Wall Mounted

System Diagram

Typical Application

• Maximizing solar self-consumption. During the day, the PV system generates electricity which will be provided to
  the loads initially. Then, the excess energy will charge the battery via Deye hybrid inverter. Finally, the stored energy
  can be released when the loads require it.
• Providing backup for critical loads: there’re independent critical load output port and grid port. It allows critical
  loads such as refrigerators, routers, lamps, computers and other critical appliances can be powered when the grid
  fails. The system can automatically switch to backup mode within 4 milliseconds. Since the automatically time is
  very short, the critical loads can work smoothly even for Non-inverter type air conditioner.
• Reducing your electricity bills: Thanks to there’re 6 time periods for battery charge and discharge. Deye hybrid
  inverter allows user to charge the battery at the off-peak time and discharge the battery during peak time. Meanwhile,
  it supports grid peak shaving function which can limit the Max. power from grid.

Working Modes

1. Selling (Only in Cape Town, Consult your local municipality)

• This Mode allows hybrid inverter to sell back any excess power produced by the solar panels to
  the grid.
• If the “time of use” is active, the battery energy also can be sold into grid.
• The PV energy will be used to power the load and charge the battery and then excess energy will flow to grid.
• Power source priority for the load is as follows: Solar Panels. Grid. Battery (until programmable % discharge is reached).

2. Zero Export To Load

Hybrid inverter will only provide power to the backup load connected. The hybrid inverter will neither provide
power to the home load nor sell power to grid. The built-in CT will detect power flowing back to the grid and
will reduce the power of the inverter only to supply the local load and charge the battery.

3. Zero Export To CT

Hybrid inverter will not only provide power to the backup load connected but also give
power to the home load connected. If PV power and battery power is insufficient, it will take grid energy
as supplement. The hybrid inverter will not sell power to grid. In this mode, a CT is needed. The external CT will
detect power flowing back to the grid and will reduce the power of the inverter only to supply the local load,
charge battery and home load.

MORE ABOUT DEYE TECHNOLOGY GROUP

Ningbo Deye Inverter Technology Co., Ltd. founded in 2007 with registered capital 300 million RMB, is one of the China’s high-tech enterprises and a subsidiary of Deye Group. With a plant area over 15,000㎡ and complete production and testing equipment, Deye has become a major player in the global solar inverter market.

Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic power system solutions, including residential and commercial power plants solutions. Also, Deye offers the right device for each application: for all module types, for grid-connection and stand-alone grids as well hybrid inverter system, for small house systems and commercial systems in the Megawatt range. Among them, PV grid-connected inverter power range from 1.5-110kW, Hybrid inverter 3kW-50kW, and microinverter 300W-2000W.

As a technology-oriented company, Deye has always been committing to research and develop new cutting-edge technologies to provide efficiency and reliable products. For example, Deye adopts T-type three-level topology and enhanced SVPWM algorithm to further improve the conversion efficiency by 0.7% compared with common SPWM.

View more products