Motor Gate Solar Conversion Kit

Installation is Easy

1. Mount your solar bracket on your gate post or nearest suitable location.
2. Install your solar panel onto the mounted bracket. (installation manual).
3. Open the junction box on the back of the panel.
4. Strip the ends of your pv cable and fasten your RED cable to the POSITIVE terminal, and your BLACK cable onto the NEGATIVE terminal.
5. Route your cable neatly to your gate motor.
6. Remove the current 220V charge controller inside the gate motor enclosure (reference your gate motor manual to make sure you are removing the correct hardware)
7. Install your solar charge controller inside your gate motor enclosure.
8. Be sure to feed your solar wire into the solar charge controller and do not mistakenly re-use your AC feed.
9.  Connect your wires as indicated on the charge controller (see diagram below).

Centurion Universal Solar Panel Bracket

Part Of Motor Gate Solar Conversion Kit

This solar panel mounting bracket is robust and versatile. It is suitable for mounting a variety of solar panels between 20W and 150W in size, against a wall or on a post. The fixed bracket included with the kit provides limited orientation capability and can be pivoted in a number of ways in order for the panel to obtain optimum sunlight coverage.

Mounting Options

Vertical Pole Mount

This is the standard mounting position for solar panels. Due to the universal clamping system, the bracket can be mounted on a round or square pole in any orientation to fully utilize the power of the sun at any angle

Horizontal Pole Mount

Suitable for applications where the bracket needs to be mounted onto a horizontal pole, for example on a balcony. The universal clamp allows the panel to maximize the suns’s potential energy.

Wall Mount

In situations where the horizontal and vertical pole mount options are not viable, the bracket can be mounted to a wall, using coach screws or rawl bolts and the base plate for support.

EPEVER 10-30A PWM Charge Controller

Part Of Motor Gate Solar Conversion Kit

Features

• Series PWM charging mode
• LED indicator indicates battery situation
• Battery temperature compensation function
• Extensive electronic protection
• USB ports available (LS-EU series only)
• User friendly design buttons
• Industrial quality standard design

CNBM Solar Panel Poly 30 Watt

Part Of Motor Gate Solar Conversion Kit

CNBM Solar photovoltaic (PV)module such as the CNBM Solar Panel Poly 30 Watt is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Poly- or multi-crystalline silicon (poly-Si or mc-Si): made from cast square ingots — large blocks of molten silicon carefully cooled and solidified. Poly-Si cells are less expensive to produce than single crystal silicon cells but are less efficient. US DOE data shows that there were a higher number of multi-crystalline sales than monocrystalline silicon sales.

Main Features

CNBM Solar Panel Poly 30 Watt

• Easy installation
• safe operation
• free maintenance
• Advanced technology
• strict quality control system with high wind-pressure and snow load
• Anti reflective glass to increase the light absorption and make the module has the function of self-cleaning in water environment,
• effectively reducing the power loss caused by dust

Solar PV Cable Positive (+) Red & Solar PV Cable Negative (-) Black

Part Of Motor Gate Solar Conversion Kit

Technical Data

For more info on solar powered gate motors, click here